Community of fiber, mobile and ADSL usersI have the IdONT GPON that the technician gave me, but it only has 10 digits with a number and letters.My ONT is useless to me because it starts with 0xf.It's an old Huawei HG8240 and I don't know how to put it on.Do you recommend any ONT for this type of IdONT?To give an example of IdONT: 4FMZ5BSVVV.The old one started with 0xf2020.... If someone can tell me an ONT compatible with that type of idont tell me.I have a UFiber Nano G and it gives very good resultsWhat the technician gave you is the GPON pass to register the ONT against the OLT, it has nothing to do with the IDONT, since they are different equipment.The F6640 does not use IDONT.They are the same thing (the PLOAM password) with a different name.Except that Movistar uses one in hexadecimal format that makes no sense when you see it in ASCII (0xF2022…) and on other sites like Orange it is "used" with letters in ASCII.At the end one way or another it's 10 bytes.0xf is in hexadecimal format.You have to convert the 10 digits from ASCII to hexadecimal and put it starting with 0x.Example for that IDONT that you have put would be 0x34464D5A354253565656.Thanks for answering I will try it if it synchronizes the hg8240.One thing Virgin goes through vlan10 directly, right?and instead of PPPoE it goes through DHCP right?according to the technician with the GPON it is enough he told me.is that this router is shit click on a stick hehehehe I want to put my Asus the thing is that I have Android TV that 4K you have to do something else to the Asus or something for the TV or it's not necessary thanks.VLAN and priority of each operator for internet, voice and TV with PPPoE/IPoE usedthanks for answering having the idont is enough to configure or do you need user and passwd as Movistar PPPoE?according to the technician you put the idont and it works by putting the VLANs the TV is 50 then??sorry I'm a bit lostin the table it says 'iPoe', which comes to be DHCP.and it works by putting the VLANs the TV is 50 pueYou're going to have to tell us that ;)or search the forumI have no documentation about it.The agile TV connects to the internet without further ado I don't know if Virgin installs it since it is from the same group as Euskaltelthanks mate for answering I'm going to try then I'll tell you it's that it's a crap router seriously I think they put the worst hehe greetingsHi, the ONT, the pow is solid green, that's because it connects, but I don't have internet access, I don't know why, apart from that, I need a username and password for the fiber, that's going to be more difficult, I just opened the router, I have the photo, I think it's still modified to not be able to do the ttl I leave you the photo of the board and the firmware it hasfirmware: ZTEGF6640P2N3_VIRGIN.If someone can think of something like we can get the data, it would be special, thank you very muchHi, the ONT, the pow is solid green, that's because it connects but I don't have internet access, I don't know why I need a username and passwordHow does it ask you for a password?in what form?I mean and I put my ID on my ONT the pow I know it is fixed in green but it does not give me a connection I do not know why the ONT that I have tested is the ZTE f601 and a huawey 8240h they keep the pow fixed but it does not give internet my question is with the idont is enough to have internet?or is a user password needed to put the VLANs???explain me a bit I'm lost how do I do the log I don't know how to do it thanksSecond time I ask you for a screenshot, man.especially the configuration of the ONT'sGo to Hex.They give them to you written in ASCII characters of the same thing, the technician who installed the fiber told me.any site to convert it to something has anyone managed to change this crap router?It is likely that no one has achieved it hahahahawhich CTO are you connected to?Hi, I have Virgin telco and the technician gave me the ID that he told me, that was enough, so I put that ID in the ONT and the POW stays fixed on green but it doesn't give internet but I don't know SDI, user password will be needed as in Movistarsee what a CTO is: Protest on the network against excess fiber and multiple CTOs hanging on facadesLook at your cable to see which one it goes to, and take a picture of it (or say which company comes out)...I know it's all very annoying.(you should have hired MásMóvil ;) )Hello, okay, I didn't understand you because Virgin telco uses direct Orange fiber, they connected me to the Orange box according to the technician, I had direct coverage, not indirectand thank you very much for the help the technician gave me the ID at least it is a step heheheheModerators |Standards |Legal information |We enter for affiliated purchases